Tips

Structural Value Engineering: Saving Cost Without Losing Safety

Structural value engineering explained: the job plan, where savings are found (system, grid, foundations, materials), best timing and safety limits.

16 November 2026 · 4 min read · Stadin

The structure is often one of the largest items in a building's construction budget, so owners naturally look for ways to reduce it. Structural value engineering is a disciplined way to do that: finding alternatives that deliver the same function at a lower total cost, rather than simply cutting material. This article covers where savings are usually found, when to do it, and the limits that must not be crossed.

What Is Structural Value Engineering?

Value engineering is a systematic process for delivering the functions an owner needs at the lowest life-cycle cost. The key words are function and life-cycle cost: initial cost, maintenance, energy and future repairs all count.

It is not one-sided cost cutting. Removing reinforcement without recalculating, or lowering the concrete grade without re-checking member capacity, is not value engineering. It is a reduction in quality, and it carries risk.

For Indonesian state buildings, Ministry of Public Works and Housing Regulation No. 22/PRT/M/2018 requires a value engineering workshop for buildings larger than 12,000 m² or taller than 8 storeys. On private projects it is voluntary, but the principles are the same.

The Value Engineering Job Plan

The widely used methodology, based on SAVE International, has five phases:

  1. Information – understand the design, the owner's needs and the key function of each system.
  2. Creative – generate as many alternatives as possible without judging them yet.
  3. Evaluation – screen ideas against agreed criteria: cost, time, buildability and impact on architecture and MEP.
  4. Development – turn the best ideas into workable proposals with cost comparisons, pros and cons.
  5. Presentation – present the proposals so the owner can decide what goes into the design documents.

Where Structural Savings Are Usually Found

Every project is different, but a few areas are almost always worth reviewing.

Structural system

The choice of lateral system (moment frames, shear walls or a combination) strongly affects concrete and reinforcement quantities. For floors, flat slabs or post-tensioned slabs can reduce slab depth or the number of beams for certain spans.

Column grid

Reworking column spacing together with the architect often leads to more efficient beams and more repetitive formwork. A regular grid also speeds up work on site.

Foundations

Foundations depend most on soil data. Adequate soil investigation, as explained in our article on CPT and SPT, lets the engineer choose pile type and depth with more confidence. Comparing bored piles and driven piles is often part of a value engineering study.

Material grades and specifications

Using the right concrete and reinforcement grade for each element, instead of one grade everywhere, can be more efficient. Specifications must still meet SNI 2847:2019 and what is available locally.

AreaTypical alternatives studiedWhat must be checked
Structural systemFrames vs shear wallsSeismic performance, space planning
SlabsConventional vs post-tensionedSpan, storey height, specialist contractor
Column gridRevised column spacingRoom function, basement parking
FoundationsPile type and depthSoil data, rig access, neighbouring buildings
MaterialsDifferent grades per elementSNI, availability, quality control

When to Do It

Value engineering can be done at any stage, but the earlier it happens, the greater the return. At concept or schematic stage, changing the structural system only means changing drawings. During construction, the same change can mean demolition, re-ordering material and delays.

Tip: Schedule the structural value engineering review before detailed design starts, when soil data is available but construction drawings have not yet been produced.

Contractor proposals during construction can still be useful, but the structural designer must check them before they are approved.

Limits That Must Not Be Crossed

Structural value engineering always stays within codes and safety:

  • Seismic requirements of SNI 1726:2019 and loads from SNI 1727 are not negotiable.
  • Every alternative must be recalculated by a competent engineer, not decided from rough estimates.
  • A lower initial cost that raises maintenance cost or repair risk is not a real saving.
  • Design changes must be recorded and kept consistent with the building permit documents.

A review may also conclude that the original design is already efficient. That is still a useful result: the owner gains confidence that the budget is well spent.

Conclusion

Good structural value engineering starts from function, happens as early as possible and always stays within the SNI. The structural system, column grid, foundations and material specifications are where results most often appear, but the size of any saving always depends on the project. If you would like an independent review of your building's design efficiency, our structural design team can help.

This article provides general information. Every project still needs to be analysed and calculated by a competent structural or geotechnical engineer, in line with the applicable SNI codes and regulations.

Contact

Start your project

Send us your architectural drawings or project brief. Our engineers will get back to you with scope, schedule and fee.